Pacmac 2015 - MORE MACHINE PARAMETERS; SERVO AND DUMP SETTINGS; SCALE READY SETTINGS; DUAL PROGRAM MODE

2015OPERATIONSMANUAL

13

 DUMPS
o SETS THE NUMBER OF DUMPS THE MACHINE REQUIRES
FROM THE SCALE BEFORE MAKING 1 FILLED BAG.
 SERVO SETUP
o SELECTS WHICH SERVOS THE COMPUTER SHOULD ATTEMPT
TO USE. SEE PAGE 100 FOR MORE INFO.
 PRODUCT ARRIVAL WIDTH
o DURATION OF THE PRODUCT ARRIVAL PULSE.
 SERVO PULSE WIDTH
o DURATION OF THE FILM DRIVE OUTPUT PULSE.
 DUAL PROGRAM MODE
o USED TO MAKE VERY LARGE BAGS. SEE PAGE 100 FOR
MORE INFO.
 TEMPERATURE CONTROL MODE
o FUTURE R&D. CURRENTLY UNAVAILABLE.
 SCALE READY VALID WIDTH
o SETS THE MINIMUM WIDTH (DURATION) OF THE SCALE
READY SIGNAL THAT THE COMPUTER WILL ACCEPT.
 SCALE READY IGNORE START/STOP
o COMPUTER WILL IGNORE A SCALE READY SIGNAL BETWEEN
THIS DEGREE AND THE IGNORE STOP DEGREE UNLESS THEY
ARE THE SAME.
 CUSHION LENGTH
o CHANGEABLE BY PACMAC PERSONNEL ONLY.
 SPECIAL FUNCTION
o CONFIGURES OUTPUT AUX 4. FOR SPECIAL FUNCTION. SEE
PAGE 100 FOR MORE INFO.
 JAW STAGE MODE
o ONLY VISIBLE WHEN SERVO SETUP IS SET TO INCLUDE JD.
SEE PAGE 100 FOR MORE INFO.
 SCALE OVERLOAD CHECK
o CONFIGURES SCALE OVERLOAD FEATURE. SEE PAGE 100
FOR MORE INFO.