Pacmac 2015 - MACHINE PARAMETERS; SCREEN SAVE AND HOLD DEGREE; JAMMED JAW SETTING; MODE SETTINGS

2015OPERATIONSMANUAL

12

MACHINE PARAM.
THE MACHINE PARAM. SCREEN HAS 2 LEVELS. THE FIRST LEVEL
GIVES YOU ACCESS TO INPUT, OUTPUT, SERVO AND ETHERNET PARAM.
THE SECOND LEVEL ALLOWS THE OPERATOR TO CHANGE THE
FOLLOWING.
 SCREEN SAVE
o THE AMOUNT OF TIME BEFORE THE SCREEN SAVER IS
SHOWN.
 HOLD DEGREE
o THE DEGREE THAT THE MACHINE CHECKS THE PRODUCT
DETECT INPUT.
 JAMMED JAW SET
o SETS THE MAX NUMBER OF TIMES THE JAWS CAN JAM
BEFORE THE MACHINE E-STOPS.
 MODE
o SETS THE MACHINE INTERFACE MODE. SEE PAGE 64 FOR
MORE INFO.