10.1 General
Important: Place the logs on top of each other. They stay in place when the blade
gently snaps them together.
3. Close the protective guard.
4. Use the hand lever to start splitting.
10.1.5 Trees with large branches
To cut trees with big branches
1. Turn the trees so that the root end goes in first.
2. Make sure that the tree goes root end first into the wedge and the big branch splits.
10.1.6 Stuck log - faulty cutting
If a tree is stuck as a result of faulty cutting, follow the instructions below.
PTO powered
1. Stop the machine by using the emergency stop lever.
©
TP SILVA 2023
Version 1.1
32 / 70 Palax C750.2
ORIGINAL INSTRUCTIONS
To Next Page
