11.4 Operation on the last log
Ergo operation: Keep log-pusher handle down to hold the log in position.
Note: This speeds up the process. As the pusher reverses, the log falls into the
splitting chute and the operation can be launched manually immediately.
12 Fully hydraulic control (Palax Pro & Palax Pro+)
Circular saw blade operation, start of splitting, infeed conveyor operation, and accessory
operation can be controlled by fully hydraulic joystick-valve.
©
TP SILVA 2023
Version 1.1
41 / 70 Palax C750.2
ORIGINAL INSTRUCTIONS
To Next Page
