EasyManua.ls Logo

Palax C750.2 - Operation on the Last Log

Default Icon
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11.4 Operation on the last log
Attention: When operating with Ergo: To avoid short or small trees to roll over,
press the handle to increase the clamping force.
11.4 Operation on the last log
The minimum length of the log is 25 cm and the maximum length is 55 cm.
Warning: Do not saw logs shorter than 25 cm. Risk of the blade damage.
Warning: If the tree tilts, jerks, or moves during the operation, stop cutting
immediately.
Warning: Always check the length of the remaining tree.
Make sure there is always enough tree left for the last cut. For example, if you intend to
saw i.e. 30 cm logs, make the last cut when there is 2 x 30 cm of the tree left.
Cut the leveling piece 1 whenever there is still 2 or 3 intended length pieces left.
For example, if you intend to saw 30 cm logs:
©
TP SILVA 2023
Version 1.1
40 / 70 Palax C750.2
ORIGINAL INSTRUCTIONS

Table of Contents

Other manuals for Palax C750.2

Related product manuals

Palax C750.2 - Operation on the Last Log