14.13 Sharpen the circular saw blade, hard-metal
14.13 Sharpen the circular saw blade, hard-metal
Use appropriate grinding machine with a diamond grinding wheel for the best result and
durability of the saw blade.
Note: You can use a diamond file for light sharpening of the saw blade.
14.14 Tension the circular saw blade, hard-metal
Warning: Sawing with a dull saw blade may result in tension faults.
Attention: If tension faults occur, leave the tensioning of the hard-metal blade to
a professional.
Tension faults rarely occur in hard-metal blades. To avoid tension faults, always make
sure the blade is sharp.
14.15 Tighten the infeed conveyor belt
1. Make sure that the plane is as close to the roller as possible. Adjust accordingly.
2. Use the tightening screws, located at the end the conveyor belt's extension deck, to
tighten the conveyor belt.
©
TP SILVA 2023
Version 1.1
64 / 70 Palax C750.2
ORIGINAL INSTRUCTIONS
To Next Page
