3 Introduction
This manual provides assembly, operating and maintenance instruction for the PALAX
C750 Pro, PALAX C750 Pro+, and PALAX C750 Ergo machine.
This user manual contains all the information necessary for safe assembly and operation
of the PALAX C750 Pro, Pro+, and Ergo machine. Read the instructions carefully before
assembly and use and keep the manual for future reference.
You can find the latest versions of the assembly, operation and maintenance instructions
on our website: palax.fi
4 Intended use
Palax C750 (Pro, Pro+, and Ergo) Firewood Processor with Conveyor is intended for the
production of firewood from round timber. The use of the machine for any other purpose
is prohibited.
Sand, nails or other impurities in wood may damage the machine. The maximum
diameter of the wood processed with the machine is 30 cm. The shape and
deformations, such as branches and knots, of the wood increase the actual diameter of
the wood and may prevent it from being fed into the machine. The machine is designed
to work optimally with wood with a diameter of +20 cm.
The maximum length of the tree to be split in the splitting chute must not exceed 55 cm.
5 Operating conditions
The machine can be operated in temperatures between -20°C to +30°C, in all weather
conditions. Only use the machine outdoors.
Warning: Do not operate the machine indoors, risk of dust and/or exhaust
fumes.
Before operation, make sure that
• You have read and understood this instruction manual.
• The machine and conveyor have been checked and are in working order.
• There are no people in the operating range.
• The machine is on a hard and level surface, the machine is leveled and firmly in
place.
• The operation environment is adequately lit.
• All protective guards are intact and secured properly.
• The circular saw blade is intact.
• All controls work properly.
©
TP SILVA 2023
Version 1.1
8 / 70 Palax C750.2
ORIGINAL INSTRUCTIONS
To Next Page
