1 Warranty
"Warranty terms come into force when you register your customer ship on the
extranet service found on our website."
The guarantee is valid for the original buyer for 12 months, starting from the date of
purchase, but for no more than 1,000 operating hours. Always contact the machine's
seller before undertaking any procedures in matters concerning warranty.
A warranty claim must be issued to the seller in writing immediately upon the discovery
of a defect. If the defect concerns a damaged part or component, please send a
photograph of the damaged part or component to the seller, if possible, so that the fault
can be identified. When submitting a warranty claim, the buyer must always include the
type and serial number of the machine in the claim and present a receipt that includes
the date of purchase. Warranty claims must be submitted to an authorized retailer.
The warranty covers
• Parts damaged in normal use due to faults in the material or manufacturing.
• Repair expenses in accordance with the manufacturer. Faulty parts will be replaced
with new ones. A faulty part or parts replaced due to a material fault must be returned
to the manufacturer via the retailer.
The warranty does not cover
• Damage caused by normal wear or tear (such as saw blades and belts), improper use
or failure to observe the instruction manual.
• Damage caused by negligence of maintenance or storage procedures detailed in the
instruction manual.
• Damage occurred in transport.
• Cutting blades, V-belts and oil, as well as normal adjustment, care, maintenance or
cleaning procedures.
• Defects in a machine to which the buyer has performed or commissioned structural
or functional changes, to the degree that the machine can no longer be considered
equivalent to the original machine.
• Other potential costs or financial obligations resulting from the procedures mentioned
above.
• Indirect costs.
• Travel costs resulting from the warranty repairs.
• The warranty for parts replaced during the warranty period of the machine expires at
the same time as the machine's warranty.
• The warranty is void if the ownership of the machine is transferred to a third party
during the warranty period.
• The warranty is void if any of the machine's seals have been broken.
If a fault or defect reported by the customer is found not to be covered by the warranty,
the manufacturer has the right to charge the customer for the identification and possible
repair of the fault or defect in accordance with the manufacturer's current price list.
©
TP SILVA 2023
Version 1.1
5 / 70 Palax C750.2
ORIGINAL INSTRUCTIONS
To Next Page
