14.7 Change oil in the angular gear...................................................................... 53
14.8 Remove and replace the circular saw blade..................................................54
14.9 Tighten the V-belts, angular gear/centre shaft...............................................57
14.10 Replace the V-belts, angular gear/centre shaft............................................58
14.11 Tighten the V-belts, centre shaft/blade shaft................................................59
14.12 Replace the V-belts, centre shaft/blade shaft.............................................. 63
14.13 Sharpen the circular saw blade, hard-metal................................................ 64
14.14 Tension the circular saw blade, hard-metal................................................. 64
14.15 Tighten the infeed conveyor belt..................................................................64
14.16 Replace the infeed conveyor belt................................................................ 65
14.17 Rotation direction of the infeed conveyor belt..............................................66
14.18 Clean the conveyor...................................................................................... 66
15 Troubleshooting................................................................................... 66
16 Storage.................................................................................................. 68
17 Accessories.......................................................................................... 68
17.1 Automatic high-speed valve........................................................................... 68
17.2 Splitting wedges............................................................................................. 68
17.3 Splitting cylinder............................................................................................. 69
17.4 Log table or stand..........................................................................................69
18 PALAX manuals & feedback............................................................... 69
To Next Page
