127
Error Recognition by Using the 7-Segment Display
This function is only available with MBB Control.
Status indication (7 segments, static, System LED flashing green (2 Hz)
Status Description
Status
System switched on and all right, control box switched off
Status
System switched on and all right, control box switched on
Error indication (7 segments, flashing (0.5 Hz), System LED flashing red (2 Hz)
Status Description Action for error reset
Error
Undervoltage Switch off/on control box
Bedienung_Tastencode_EN.fm Seite 127 Donnerstag, 15. August 2019 4:13 16
To Next Page
Loading...
Need help?
General
