137
Standard Models (Upright Platform)
44 Conical lubricating heads (grease nipples)
45 Roll-off protection bearings
To grease and lubricate:
Clean the conical lubricating heads.
Use a grease gun to press grease into the conical lubricat-
ing heads (44) until the bearing is filled (see chapter “Lubri-
cants and Operating Media” from p. 188).
Lubricate the bearings of the roll-off protection (45) (see
chapter“Lubricants and Operating Media” from p. 188).
Betriebsanleitung_Hubladebuehnen_EN.book Seite 137 Donnerstag, 15. August 2019 4:04 16
To Next Page
Loading...
