Palfinger PTV 33 - 5 Parts List

PTV 35/44/55/66 Installation Manual
Rev. 1.1 9
5 Parts List
Installation of the parts listed below can be found throughout the installation manual.
All of the small parts are bagged, boxed or attached inside the Hydraulic Enclosure.
Nylon Strap Battery Kit: 99-7520-001
Nylon Hold Down, 1 pc
Hex Head Cap Screw, 3/8"-16x10", 4 pcs
Washer, Flat, 3/8" USS, Zinc; 8 pcs
Nylock Nut, 3/8"-16; 4 pcs
Electric Components: Single Pump
KET06882A; Cable, 11", 3/8" Lugs, 2GA, Red, 1 pc
KET06062A; Bus Bar, Red; 2 pcs
KET05916A; Bus Bar, Black; 2 pcs
EM 781; Nut, Serrated, 3/8"-16, SS; 6 pcs
Electric Components: Dual Pump
KET06882A; Cable, 11", 3/8" Lugs, 2GA, Red, 2 pc
KET06062A; Bus Bar, Red; 2 pcs
KET05916A; Bus Bar, Black; 2 pcs
EM 781; Nut, Serrated, 3/8"-16, SS; 6 pcs
Hydraulic Fittings Kit: 80-1121-100
Elbow, 90°, 1/4", JIC Female - 1/4", JIC Male, 2 pcs
Elbow, 90°, 3/8", JIC Female - 3/8", JIC Male, 2 pcs
3 ft. Hose Kit: 80-1121-001
1/4" Hoses, 3 ft (36"), 2 pcs
3/8" Hoses, 3 ft (36"), 2 pcs
Decal Base Kit: 85-1121-010
Decal Base Kit; 10 pcs
2X
1/4"
2X
3/8"
2X
1/4"
2X
3/8"