Palfinger PTV 33 - Page 25

PTV 35/44/55/66 Installation Manual
Rev. 1.1 23
Flat Bar Posts (if necessary): Corner stiffeners are common and should NOT be removed. It is
recommended to use “flat bar” with the same thickness as the stiffeners, typically ¼” to 3/8” thick x 3”
wide. The liftgate Installation weld procedure is the same.
Corner
Stiffener
Corner
Stiffener
Flat Bar
Flat Bar
Flat Bar
Flat, Even Surface
after installing
flatbar
Stiffener & Flatbar
Thickness