- 15 (E) -
Iris connector (IRIS)
Input terminal for lens with an iris control function.
Zoom/Focus connector (ZOOM/FOCUS)
(AW-E655 only)
This connector is for the remote cable of the lens and
is a standard input connector for lenses with remote
functions for zooming and focusing.
When the camera is to be mounted on a Panasonic
pan/tilt head (such as the AW-PH360/AW-PH400/
AW-PH405/AW-PH650), do not use this connector —
connect the remote cable of the lens to the LENS I/F
connector on the pan/tilt head instead.
I/F remote connector (I/F REMOTE)
Input terminal dedicated to control signals from the
optional Remote Operation Panel (ROP) (such as the
AW-CB400) and the RCU (such as the
AW-RC600) and the camera pan/tilt unit (such as the
AW-PH360/AW-PH400/AW-PH405/AW-PH650).
• AW-CB400 is connected through the optional
connecting cable (AW-CA50T8).
• AW-RC600 is connected through the optional RCU
cable (AW-CA50A26).
• Use the cable supplied with the pan/tilt head to connect
the AW-PH360, AW-PH400, AW-PH405 or AW-PH650.
Power indicator
Red LED lamp lights to indicate that the specified DC
power is supplied to the camera.
Pin No.
Signal
Pin No.
Signal
1 Return Control 7 Iris Follow
2 Not Used 8
Auto/Remote Control
3 GND 9 Not Used
4 Auto/Manual Control 10 Not Used
5 Iris Control 11 Not Used
6 Lens Power 12 Not Used
Pin No.
Signal
Pin No.
Signal
1
Focus Mode
Position/Speed/
Auto Focus
7
Signal Control
(+5.0 V)
2
Zoom Mode
Position/Speed
8 Focus Control
3 GND 9 Zoom Control
4
Iris
Remote/Camera
10
Iris Mode
Position/Speed
5 Iris Control 11 +V (+7.5 V)
6 Lens Power 12 –V (+2.5 V)
To Next Page
Loading...
