ENGLISH
- 6 (E) -
• Turn power off before connecting or disconnecting
cables.
• Connection or disconnection of any studio cable,
RCU cable or other cable to any unit of equipment
must be performed while power is off.
• While the camera is in automatic mode;
Shooting of bright objects in ELC operation mode
may result in a smeared picture unique to the CCD.
The ATW function under fluorescent illumination can
adversely change the white balance.
SPECIAL NOTES ON OPERATION
• There is a cooling fan inside.
Do not cover the port or otherwise block ventilation
during operation. Internal heat buildup can cause a
fire.
It is an expendable part, and must be replaced about
every 30 000 hours. (Whenever fan replacement
is necessary, be sure to ask the store where you
purchased the set.) (AW-E750, AW-E655)
To Next Page
Loading...
