53
Detail
[0~3]
Adjust the sharpness of the image.
Factory settings: 2
Contrast
[0~4]
Adjust the contrast level of the image.
Factory settings: 2
DRS
[Off, On]
Set here is the DRS function which provides just the right amount
of compensation when images with significant light/dark
differences are displayed.
Depending on the shooting conditions, however, the picture
quality may drop with increased noise.
Factory settings: Off
Back Light COMP
[Off, On]
Set backlight compensation function to “On” or “Off”.
Under backlight conditions, the function prevents darkening as a
result of light striking the backs of subjects, and makes it possible
to shoot images in shade or shadow more brightly.
Factory settings: Off
DNR
[Off, Low, High]
Set the level of the digital noise reduction effect so that light,
noise-free and clear images will be output even at night and in
other low-brightness environments.
When “Low” or “High” is selected, noise can be eliminated.
However, there is an increased possibility that afterimages may
occur.
Factory settings: Low
To Next Page
Loading...
