Panasonic AW-UE150WP

Matrix Type [Normal, EBU, NTSC, User]
Select the type of color matrix.
The setting is confirmed with the [Set] button.
Normal
This item is used to load the preset color matrix data and
compensate for the saturation and color phase.
EBU
NTSC
User On the [Matrix] screen, the [Linear Matrix] and [Color
Correction] values can be adjusted by the user.
Factory settings: Normal
Adaptive Matrix [Off, On]
Set Off/On the function that suppresses the linear matrix to suit the
shooting conditions.
Factory settings: Off
Matrix Settings
Linear Matrix
This can be set when [User] has been selected as the [Matrix Type]
setting.
R-G
Adjust the color to between –63 and +63 for each axis
direction.
R-B
G-R
G-B
B-R
B-G
Factory settings: (→ page 69)
Color Correction
This can be set when [User] has been selected as the [Matrix Type]
setting.
Adjust the saturation and hue for each color.
Saturation [–63 to +63]
Adjust the saturation for each color.
Phase [–63 to +63]
Adjust the hue for each color.
B_Mg Color between blue and magenta
Mg Magenta
Mg_R Color between magenta and red
Mg_R_R Color with a 1:3 magenta to red ratio
R Red
R_R_YI Color with a 3:1 red to yellow ratio
R_Yl Color between red and yellow
R_Yl_Yl Color with a 1:3 red to yellow ratio
Yl Yellow
Yl_Yl_G Color with a 3:1 yellow to green ratio
Yl_G Color between yellow and green
G Green
G_Cy Color between green and cyan
Cy Cyan
Cy_B Color between cyan and blue
B Blue
Factory settings: (→ page 70)

Lens setting screen [Lens]
The setting is confirmed with the [Set] button.
Focus Mode [Manual, Auto]
Select auto or manual mode for the focus adjustment function.
Manual Adjust focus manually.
Auto Always adjust focus automatically.
Factory settings: Auto
Zoom Mode [Opt.Zoom, i.Zoom, D.Zoom]
Set the maximum magnification rate for zoom.
Opt.Zoom Use only optical zoom.
Optical zoom up to 20× is possible.
i.Zoom Enable the i.Zoom function.
When this function is enabled, digital zoom is used while
reducing image degradation.
When [Format] in the [System] screen is 2160/59.94p,
2160/29.97p, 2160/50p, 2160/25p, 2160/24p,
2160/23.98p
Up to 24× zoom is possible combining optical zoom and
digital zoom.
• When [Format] in the [System] screen is other than one
of these, up to 32× zoom is possible combining optical
zoom and digital zoom.
D.Zoom Enable the digital zoom function.
Higher digital zoom magnifications will result in coarser
images.
Factory settings: Opt.Zoom
Max Digital Zoom
[×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10]
Set the maximum digital zoom magnification.
This is only enabled when [Zoom Mode] is set to [D.Zoom].
Factory settings: ×10
<NOTE>
• Higher digital zoom magnifications will result in coarser images.
Digital Extender [Off, ×1.4, ×2.0]
Make settings for the digital extender function.
Off Turn the digital extender function off.
×1.4 The digital zoom will be fixed at 1.4×.
×2.0 The digital zoom will be fixed at 2.0×.
This is only enabled when [Zoom Mode] is set to [Opt.Zoom].
Factory settings: Off
OIS [Off, On]
Turn the optical image stabilization (OIS) function off/on.
<NOTE>
• The optical image stabilization (OIS) function’s level of correction is
reduced during pan/tilt operations.
Factory settings: Off
108
Web screen configurations (continued)