Panasonic CF-S10 Series - Page 21

21
Preparations
Names Functions/Reference
J USB 3.0 Port
Connect the USB cable. This port is compatible with USB 1.1/2.0/3.0.

Reference Manual “ (Peripheral)”
K PC Card Slot

Reference Manual “ (Peripheral)”
L
SD Memory Card
Slot
The slot only accepts SD/SDHC/SDXC memory cards.

Reference Manual “ (Peripheral)”
M
Drive Power/
Open Switch
OFF/ON
Slide the switch to the right to open the disc cover. (This works only when the •
power is on.)
Each time you slide the switch to the left, the drive power will turn on or off.
•
(This works only when Windows has started up.)
N CD/DVD Drive

page 41,
Reference Manual “ (CD/DVD Drive)”
D
B
C
A
A
Battery Latches These latches are locked automatically when inserting the battery pack properly.
B
Battery Pack

Reference Manual “ (Battery)”
Follow the procedures below to insert/remove the battery pack.
C
RAM Module Slot
Insert the RAM module.

page 46
D
Emergency Hole
To remove a disc when the disc cover cannot be opened or when the computer
is powered off, insert a pointed object (e.g., the bent-out tip of a paper clip, or
the tip of a ballpoint pen) into the emergency hole.

page 43
To insert
•
Slide the battery pack in parallel with the arrow
direction and attach it so that the left and right dents
on the new battery pack match the projections of the
computer.
Dent
Pro
j
ections
Dent
To remove
•
Slide both the left and right latches to the
unlocked position
, and push out the
battery pack in parallel with the computer.
DFQW5600ZABasicManualCF-S10.indb21DFQW5600ZABasicManualCF-S10.indb21 2011/11/1514:07:292011/11/1514:07:29