Panasonic CF-S10 Series - Exit Menu

60
Getting Started
Setup Utility
Exit Menu
Menu Functions
Save Values and Reboot To reboot the system after saving the changes.
Reboot Without Saving
Changes
To reboot the system without saving the changes.
Save Options
Menu Functions
Save Current Values To save the changes for all Setup options.
Load Previous Values To load previous values for all Setup options.
Menu Functions
Load Default Values To return the settings to the default values.
Menu Functions
Boot Override To select a boot device which operates only in the next booting.
If the item is grayed and cannot be selected, press
to close the Setup
Utility, and then start up the Setup Utility again.
Menu Functions
Repair Your Computer To perform system recovery tools (reinstalling software or erasing hard
disk data).
This is not displayed if the Hard Disk Data Erase Utility has been executed.
If the item is grayed and cannot be selected, press
to close the Setup
Utility, and then start up the Setup Utility again.
Diagnostic Utility
To start Diagnostic Utility. (

page 75)
If the item is grayed and cannot be selected, press
to close the Setup
Utility, and then start up the Setup Utility again.
DFQW5600ZABasicManualCF-S10.indb60DFQW5600ZABasicManualCF-S10.indb60 2011/11/1514:08:272011/11/1514:08:27