■ When the back cover is opened
■ How to use the remote control
Signal [B ↔ A] switch
• Used when 2 or more units
are installed in 1 room.
(Consult your dealer)
• Set to A. (If one unit is
installed)
• Maximum distance : 10 m
• Make sure it is not obstructed.
OPEN
Reset points
• short to clear the
memory
• Aim at the signal receptor.
Notes
• Do not throw or drop
• Do not get it wet
• Certain type of flourescent lamps may affect
signal reception. Consult your dealer.
Signal receptor
• Signal received sound.
One short beep or one long beep.
To Next Page
Loading...
