AIR SWING
TIMER
CLOCK
1
2
3
COOL
MODE
ECONOMY
FAN SPEED
AUTO
MANUAL
ON OFF
CANCEL
SLEEP
SET
POWERFUL
OFF/ON
COOL
TEMP
HOW TO OPERATE
● Automatic, Cooling, Soft Dry, Fan
Display
Close the Cover
a
FAN
DRY
COOL
AUTO – Automatic Operation
• At the start of the automatic operation, Heating,
Cooling or Soft Dry is automatically selected
according to the indoor temperature.
• The operation mode changes every hour, when
necessary.
• Temperature is not displayed on remote control during
Auto mode operation.
DRY – Soft Dry Operation
• A very gentle Cooling Operation. Consisting primarily
of dehumidifying. It does not lower the room
temperature.
• During Soft Dry operation, the indoor fan will operate
and stop 4 seconds intervals.
■ Operation details
Cooling
Operation
Super Low airflow with 10
mins. ON and 6 mins. OFF
alternately
Switch to Soft Dry when setting temperature
is reached
Setting
temperature
HI
AUTO
AUTO
LO
AUTO
1 Press to select the desired operation mode
When pressed, the display changes in this order.
2 Press to start the operation
POWER indicator LED (Red) on indoor unit will light up.
Press once more to stop operation.
3 Press to select room temperature
• Automatic Operation
Display
- Operation with 2°C higher than standard temperature.
- Operation with standard temperature.
- Operation with 2°C lower than standard temperature.
• Heating, Cooling, Soft Dry operation
Press to increase temperature by 1°C.
Press to decrease temperature by 1°C.
– The temperature can be set between 16°C and 30°C.
– Recommended temperature
For Cooling: 20°C - 24°C
For Cooling: 26°C - 28°C
For Soft Dry:1°C - 2°C lower than room temperature.