AIR SWING
TIMER
CLOCK
1
2
3
COOL
ON
AM
MODE
ECONOMY
FAN SPEED
AUTO
MANUAL
ON OFF
SET
CANCEL
SLEEP
SETTING THE TIMER
Ensure that the current time is correct before setting the timer. The timer cannot be set if the time display is flashing.
■ Timer Cancellation Button
(To cancel the Timer)
Press the ON-TIMER or OFF-TIMER then press
CANCEL.
* The timer indicator on the indoor unit will go off.
■ To change the setting time, follow the above steps.
Timer details
• When the ON-Timer is set, operation will start before the actual set time. This is to allow the room temperature to
reach the setting temperature by the setting time (Cooling and Soft dry, 15 minutes in advance. Heating and
Automatic, 30 minutes in advance).
• Once the ON-Timer is set, operation will start at the setting time everyday.
AMON
4 To set the OFF-TIMER
Press the OFF-TIMER then
follow steps 2 and 3 as above.
3 Press SET
Lights up
→
* The timer indicator (orange) on
the indoor unit will light up.
AMON
1 Press ON-TIMER
Flashes →
Example: Set the ON-TIMER to 7:00AM
2 Press to set the time
Increase by 10 minutes
Decrease by 10 minutes
* Press continuously for quick
setting.
To Next Page
Loading...
