Panasonic DBS 824 - Delayed Ringing

Key Telephone Features Delayed Ringing
Revised April 2000 DBS 824-3.0/3.2-700 3-33
5. Repeat steps 1-4 to add another extension to a three-party Conference
Call.
Considerations
• The DBS 824 provides 3 four-party conference circuits.
• Press
FLASH
or hang up to exit a Conference Call.
• The Call Hold feature cannot be used during a four-party Conference Call.
Delayed Ringing
(CPC-S and CPC-M)
Description
Delayed ringing causes a call that is unanswered at a primary extension to
ring at a secondary extension.
CO delayed ringing causes an incoming outside call to ring at a designated
extension or extensions if it is not answered within a certain period of time.
CO delayed ringing is also available for hunt group pilot numbers.
Extension delayed ringing causes any type of call, outside or intercom, to ring
at a designated extension or extensions if it is not answered within a certain
period of time. The phones receiving the delayed call must have a DSS/BLF
key assigned to the extension originally intended to receive the call.
Considerations
• The following timers have been implemented:
- The Central Office Delayed Ring Timer controls delayed ringing for
outside calls.
- The Extension Delayed Ring Timer controls delayed ringing for
extension calls.