SLT Features Call Pickup
Revised April 2000 DBS 824-3.0/3.2-700 5-13
Considerations
• If more than one caller is attempting to reach the ringing extension, the
Direct Call Pickup feature will answer the call that arrives first.
Once the call has been picked up, other extensions that attempt to pick up
the call receive busy tone.
• You can answer incoming calls, intercom calls (both tone and voice), call
waiting, paging, transferred calls, or recalls using the Direct Call Pickup
feature. You cannot answer camp-on callbacks with this feature.
Group Call Pickup
Description
Using the Group Call Pickup feature, you can answer calls to other extensions
within your Paging Group (01-07) without entering the number of the ringing
extension.
Operation
1. Lift the handset.
2. Dial “70.”
Related Programming
• FF1 (System): Extension Class of Service
• FF3 (Extension): Extension Class of Service Assignment
• FF3 (Extension): Extension Page Group
Considerations
• If more than one call is arriving at the Paging Group, the Group Call
Pickup feature will answer the call to the lowest port number first.
• If the called extension belongs to more than one Paging Group, the Group
Call Pickup Feature will answer the call to the lowest-numbered Paging
Group first.
To Next Page
Loading...
