Camp-on DSLT Features
4-18 DBS 824-3.0/3.2-700 Revised April 2000
• The new call is connected automatically.
2. Press
HOLD
again to retrieve the first call.
Related Programming
• FF1 (System) Extension Class of Service Setting
• FF3 (Extension): Extension Class of Service Assignment
• FF3 (Extension): Call Waiting/OHVA
Considerations
• Call Waiting can be used without entering a message code.
• An extension that has DND activated, has a call on hold, is ringing (from
another call), or is engaged in a conference call cannot receive Call
Waiting messages.
• An extension that has call forwarding activated cannot receive call waiting
messages unless it has an available ML key.
Camp-on
(CPC-S and CPC-M)
Description
If you reach a busy extension, you can use the Camp-on feature to alert you
with a ring when the extension becomes free. You can then to pick up your
handset to automatically dial the extension.
Operation
To activate the Camp-on feature:
1. Lift the handset.
2. Dial the desired extension number.
3. Upon hearing busy tone, press “3.”
• The phone issues a ringback tone.
To Next Page
Loading...
