Panasonic DBS 824 - Call Duration Display; Call Forwarding

Call Duration Display Key Telephone Features
3-10 DBS 824-3.0/3.2-700 Revised April 2000
Call Duration Display
(CPC-S and CPC-M)
Description
The length of a conversation on a CO line usually appears on display phones.
The duration display shows the number of minutes and seconds the call has
lasted.
The display does not begin right away; it begins either 5, 16 or 30 seconds
after the call begins, depending on how the DBS 824 is programmed.
Related Programming
• FF1 (System): Call Duration Display
• FF1 (System): Call Duration Timer
• FF1 (System): SMDR Start Timer for CO Calls
Call Forwarding
CPC-S and CPC-M)
Call Forwarding allows users to send their calls to another extension, to an
outside line, or to voice mail. The following table shows the call forwarding
features available.
Table 3-3. DBS 824 Call Forwarding features
Descriptions
Call Forwarding--All Calls
. When the Call Forwarding--All Calls feature is
activated, all incoming calls to an extension are immediately forwarded.
Feature
Call Forwarding--All Calls
Call Forwarding--No Answer
Call Forwarding--Busy
Call Forwarding--Busy/No Answer
Permanent Call Forwarding