Toll Restriction System Features
1-38 DBS 824-3.0/3.2-700 Revised April 2000
• FF1 (System): SMDR Start Timer for CO Calls
• FF1 (System): SMDR Printing Mode 1: Outbound and Inbound
• FF1 (System): SMDR Printing Mode 2: Long Distance and Local Calls
• FF1 (System): SMDR Printing Mode 3: Header Title
• FF3 (Extension) Station Message Detail Recorder (SMDR) Report
Hardware Requirements
• A printer or external call accounting system is required to output SMDR
data.
Toll Restriction
(CPC-S and CPC-M)
Description
Access levels, including the prohibition of long distance calls or after-hours
calls, can be assigned to specific extensions or CO lines using the Toll
Restriction feature. This minimizes non-business related calls and reduces
phone bills by only allowing long distance calls over designated lines.
The following access levels are available:
Table 1-2. Toll Restriction Types
Toll Restriction
Type
Characteristics
0 Restriction of outbound dialing (except 911)
Inbound ringing trunks can be answered by or transferred to Type 0 extensions.
Intercom calls are allowed.
Cannot perform Group Call Pickup.
1 Full restriction of outbound dialing (except 911).
Inbound ringing on all trunks.
Intercom calls are allowed.
Group call pickup is allowed.
To Next Page
Loading...
