Trunk-to-Trunk Transfer Key Telephone Features
3-82 DBS 824-3.0/3.2-700 Revised April 2000
4. Press the
ON/OFF
key.
“Set Sta. Lock” disappears from the display.
Related Programming
• FF3 (Extensions): Extension Lockout Code
Considerations
• A locked extension can be used for Intercom Calls.
• Station Lockout key codes can only be set from an attendant phone or a
key phone.
• You cannot confirm Speed Dialing or set Speed Dialing while Station
Lockout is activated.
• If you enter an incorrect key code and then try to dial, the phone will issue
a busy tone.
Trunk-to-Trunk Transfer
(CPC-S and CPC-M)
Description
Trunk-to-trunk transfer allows an extension to transfer one outside party to
another outside party.
Before completing the transfer, the extension can hold a three-way
conference with the two outside parties.
Operation
1. Press the
HOLD
key during an outside call.
• Your current call is put on hold.
• “Hold #XX” (where “XX” is the line number) appears on the display.
2. Press an unlit CO key.
• The phone issues outside dial tone.
To Next Page
Loading...
