DSLT Features Onhook Dialing
Revised April 2000 DBS 824-3.0/3.2-700 4-29
• You cannot toggle back and forth between two calls during an OHVA.
Onhook Dialing
(CPC-S and CPC-M)
Description
To use onhook dialing, press the
ON/OFF
key.
The DSLT does not have a microphone, so the user must lift the handset to
talk.
Pooled Trunk Access
(CPC-S and CPC-M)
Description
The DBS 824 system is designed to accept from 4 to 8 outside lines. These
lines can be divided into seven Pooled Trunk groups. The groups are
numbered 9 and 81-86.
To select a free outside line, choose a pooled trunk group number. The DBS
automatically selects a free line from the group.
Operation
1. Lift the handset.
The phone issues an intercom dial tone.
2. Dial the desired trunk group number (81-86 or 9).
3. Dial the outside number.
Related Programming
• FF1 (System): Least Cost Routing (LCR) Access
• FF2 (Trunks): Pooled Trunk Access for Group “9”
• FF2 (Trunks): Pooled Trunk Access for Groups “81-86”
To Next Page
Loading...
