Panasonic DBS 824 - Dial Tone Disable

Dial Tone Disable Attendant Features
2-10 DBS 824-3.0/3.2-700 Revised April 2000
• The third and fourth attendants cannot have a DSS/72.
Dial “0” calls ring the first attendant, even if the first attendant has call
forwarding activated. However, if a call is unanswered, it does not skip to
the next attendant. The call continues to ring the first attendant until the
caller hangs up.
Dial Tone Disable
(CPC-S and CPC-M)
Description
The intercom dial tone can be turned off at an attendant phone. Dial tone is
turned off when a headset is used.
Operation
To disable the intercom dial tone:
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.
2. Press “#50.”
3. Press the
ON/OFF
key.
The
ON/OFF
LED goes off.
To reactivate dial tone:
Repeat the preceding steps.