Account Codes System Features
1-4 DBS 824-3.0/3.2-700 Revised April 2000
6. Dial the telephone number.
To enter an Account Code during an outside call:
1. Press the
AUTO
key.
2. Press “#.”
“Enter Account #” appears on the display.
3. Enter the Account Code (up to 10 digits).
The Account Code entered appears on the display.
4. Press “#.”
Hardware Requirements
• An SMDR printer or external call accounting system is required to collect
account code records.
Related Programming
• FF3 (Extension): Forced Account Codes
Considerations
• SLTs cannot assign account codes during a call.
Verified Account Codes
(CPC-S and CPC-M)
Description
Extensions with the Verified Account Codes feature enabled are restricted
from making outside calls without the user first entering a valid Account
Code. After a valid Account Code is entered, the Toll Restriction Service
(TRS) type assigned to the code is substituted for the extension TRS type,
thus temporarily allowing calls based on the new TRS type.
Extensions with the Verified Account Codes feature disabled can place
outside calls based on the TRS type assigned to the extension. If a user wishes
to place a call that would normally be restricted at the extension, the user can
To Next Page
Loading...
