EasyManua.ls Logo

Panasonic DBS 824 - Page 137

Panasonic DBS 824
274 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Line Appearances Key Telephone Features
3-50 DBS 824-3.0/3.2-700 Revised April 2000
Operation
Related Programming
• FF1 (System): Least Cost Routing (LCR) Access
• FF1 (System): Alert Tone for Busy Override and OHVA
• FF1 (System): Extension Class of Service Setting
• FF2 (Trunks): Pooled Trunk Access for Group “9”
• FF2 (Trunks): Pooled Trunk Access for Group “81-86”
• FF3 (Extension): Forced Least Cost Routing
• FF3 (Extension): Extension Class of Service Assignment
• FF3 (Extension): Busy Override Send
• FF3 (Extension): Busy Override Receive
• FF3 (Extension): Page Group (0-7) Extensions
• FF5 (Keys): FF Key Assignments (all)
• FF8 (LCR): LCR Setting (all)
Considerations
• Users can barge into a busy Direct Line (DL) and create a three-party
conference. To barge into a busy Direct Line, the user presses the DL key.
(The DL key will be lit red.)
• “Barge-in for Direct Lines” is controlled by the program settings for Busy
Override. For instance, if an extension with a DL key does not want the DL
broken into, that extension must have “Busy Override Receive” turned off.
Operation Action
To originate a trunk call ... Press an idle DL key.
The key blinks (green) as the call is made.
To place a call on Exclusive Trunk Hold (page 3-29)
...
Press the DL key.
To place a call on System Trunk Hold (page 3-15) ... Press the
HOLD
key.
To transfer a call ... Press
HOLD
, dial the destination exten-
sion, and then press
PROG
.

Table of Contents