Key Telephone Features Speed Dialing
Revised April 2000 DBS 824-3.0/3.2-700 3-77
To assign a name to a Personal Speed Dial number:
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.
2. Press the
PROG
key.
3. Press “#1.”
“Speed Dial Name” appears on the display.
4. Press the
AUTO
key.
5. Enter the Personal Speed Dial code.
6. Press
AUTO
to backspace and erase the existing name.
7. Use the dialpad sequences shown in Table 2-1 on page 2-8 to enter letters
and/or numbers.
• Press
FLASH
after each letter.
• Press
CONF
to switch between numbers and letters.
8. To complete the entry, press
HOLD.
To delete a Personal Speed Dial number:
1. Press
ON/OFF
.
2. Press
PROG
.
3. Press the One-Touch key.
4. Press
HOLD
.
5. Press
ON/OFF
again.
Related Programming
• FF7 (Toll Restrictions): Toll Restrictions (all)
• FF10 (Speed Dialing): Personal Speed Dial Numbers
To Next Page
Loading...
