Key Telephone Features Speed Dialing
Revised April 2000 DBS 824-3.0/3.2-700 3-79
• “CO TALK #XX” (where “XX” is the line number) appears on the
display.
2. Press the
AUTO
key.
“A” appears on the display.
3. Enter the System Speed Dial code (00-89 or 000-199).
The number and corresponding name appear on the display.
4. Complete your call and replace the handset.
The line LED changes from green to red and then goes off.
To check a programmed System Speed Dial key:
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.
2. Press the
CONF
key.
“C” appears in the display.
3. Press
AUTO
.
4. Press a System Speed Dial key.
The programmed data appears on the display.
5. Press the
ON/OFF
key.
• The
ON/OFF
LED goes off.
• The date and time appear on the display.
Related Programming
• FF1 (System): Override Toll Restriction With SSD Numbers
• FF10 (Speed Dialing): System Speed Dial Numbers
To Next Page
Loading...
