System Features Auto Set Relocation
Revised April 2000 DBS 824-3.0/3.2-700 1-9
• Extension 300 is placed out of service.
To Reactivate Extension 300:
1. Unplug the extension cable from 300.
2. Reconnect the cable.
Extension 300 assumes all extension features, TRS, and LCR settings that
were initially assigned to 200.
Related Programming
• FF3 (Extension): Auto Set Relocation Code
Considerations
• The following types of data can be transferred using this feature:
- TRS type settings
- Ring settings (trunk line, remote ringing, day/night)
- FF key data
- Extension numbers and names
- Absence messages
- Call forward settings
- Message waiting
- All settings and data defined by programming.
• Settings may not be transferred between extensions of different types. In
other words, an SLT and a KTEL cannot exchange program settings.
• Attendant 1 is excluded from this feature.
To Next Page
Loading...
