System Features Walking TRS Class of Service
Revised April 2000 DBS 824-3.0/3.2-700 1-47
3. Enter your extension number.
4. Enter your Walking Class of Service code.
5. Press “#.”
6. Enter a trunk access code (88XX, 9, 81-86).
The phone issues outside dial tone.
7. Dial the telephone number.
The Walking Class of Service remains in effect until you replace the
handset.
To clear a Walking Class of Service code:
1. Pick up the handset.
The phone issues intercom dial tone.
2. Dial “#12.”
3. Enter the original Walking Class of Service code.
4. Press “#.”
5. Replace the handset.
To confirm a Walking Class of Service code (Attendant Phone only):
1. Pick up the handset.
The phone issues intercom dial tone.
2. Press the
CONF
key.
3. Dial “#12.”
4. Enter the extension number.
The Walking Class of Service code for that extension appears on the
display.
Considerations
• Walking Class of Service can be used by KTELs, DSLTs, and SLTs.
• A Walking Class of Service code can be used on more than one extension.
To Next Page
Loading...
