Attendant Features System Time and Date Control
Revised April 2000 DBS 824-3.0/3.2-700 2-19
9. Enter four digits for hours and minutes (24-hr. time).
For example, for 11:00 a.m., enter “1100.”
10. Press #.
11. Press the
ON/OFF
key.
The new date and time appear on the display.
To reset the minutes display to “00:”
If the clock is five minutes slow or fast, you can re-synchronize the minutes
setting to “00,” provided the current minutes display is between “:55” and
“:05.”
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.
2. Press the
PROG
key.
“F” appears on the display.
3. Dial “#4.”
“Time Adjusted” appears on the display.
4. Press the
ON/OFF
key.
The
ON/OFF
LED goes off.
Considerations
• The month is entered in numeric form, but is displayed as the name of the
month.
• The day of the week is calculated automatically.
To Next Page
Loading...
