to store the name.
r and q and then repeat steps
8
,
9
to enter and store “House
No.” and “Postcode”.
The Owner ID settings screen disappears.
Auto setup for your unit is complete. You can now make your
favourite channels and store them in the required order in the
profiles (➔ 46).
Tips
To correct the character
1. Press [w, q] to select the character.
2. Press [e, r] to correct the character.
To display the Owner ID information on TV
Press and hold [g] on the main unit for more than 5 seconds.
The PIN number is not displayed.
After 30 seconds this menu automatically disappears.
Clock Setting
This unit usually obtains time and date information from
digital broadcasts and automatically corrects the time
several times a day.
However, if the clock is not set correctly, make clock
adjust correctly.
In the case of a power failure, the clock setting
remains in memory for approximately 60 minutes.
With the unit stopped
•
•
e, r
to select “To Others” then
e, r to select “Setup” then
e, r to select “
Others
” then q.
e, r to select “Clock” then
e, r to select “Off” of “Automatic”
then
to confirm new date and
time and to initiate the clock.
Tips
To return to the previous screen
Press [RETURN].
To exit the screen
Press [EXIT].
Notes
If a TV station transmits a time setting signal, and when “Automatic”
in the Clock setting menu is set to “On”, the automatic time correction
function checks the time and if necessary it is adjusted several times
every day.