25
RQT8856
Advanced Features
Check, Change, or Delete Programmes
The timer recording list can be viewed even when the
unit is off.
See “Tips” for explanation of icons displayed.–
e, r to select the programme.
to delete.
You cannot delete programmes that are
currently recording.
to modify the programme.
e, r, w, q to make changes,
then
–
Notes
Recording may fail if there are changes to the station’s
programming.
“z” disappears from the unit’s display when no timer programme is
set or when all timer programmes are deactivated.
Tips
You can enter up to 16 programmes a month in advance.
Drive
space
No.
Name Date Start Stop
Mode
STTL
Timer
Recording
Remain 1:54 SP
14:15:16 6/ 3 M ON
New Ti mer Pr og ramme
A
B
A
Timer Recording screen icons
z: Timer programme is active.
*
: Currently recording
W
: Programmes are overlapped. Recording of the programme
with the later start time starts when the earlier programme
finishes recording.
Q: You stopped a weekly or daily timer recording. The icon
disappears when the next timer recording starts.
F
: The disc was full. (not enough space)
: The TV programme may not be recorded due to copy-protect.
X
: Recording stopped (Dirty disc, etc.)
B
Drive space
OK: Recordable
➔ (Date): For recordings made daily or weekly, the display will show
until when recordings can be made (up to one month
ahead from the present time) based on the time remaining
on the disc.
!: It may not be possible to record because:
the disc is write-protected.
there is no more space left.
the number of possible recordings has reached its
maximum.
•
•
•
–
–
–
To deactivate timer programme
(e.g. to interrupt a daily or weekly timer
programming)
The timer recording list can be viewed even when the
unit is off.
See “Tips” (➔ left) for explanation of icons
displayed.
–
e, r to select the programme.
“z” (➔ left) disappears from the timer
recording list.
Press the “Red” button again to activate timer
programme.
–
–
Tips
You can deactivate the timer programme in the following
procedure as well.
Perform steps 1–2 (➔ above)
1. Press [OPTION]
2. Press [e, r] to select “Timer Off” then press [OK].
Making timer recordings on the
television
To make a timer recording with your television, connect
to a television with a Q Link function (➔ 34) that you
can use for setting timer recordings using a fully wired
21-pin Scart cable (➔ 8, 9).
Make timer programming on the
TV.
to turn the unit off.
The start and end of recording is controlled
by TV.
–
Tips
To stop recording
Press [g STOP].
Notes
When this unit is in EXT LINK standby (“EXT-L” on the unit’s display
lights), recording from TV does not start.
Programmes are recorded as one title on this unit when the end
time of the earlier timer recording and the start time of the later
timer recording are close to each other.
RAM
To divide the titles, go to “Divide Title” (➔ 38).
•
•
RQT8856-BDTP070306.indb25RQT8856-BDTP070306.indb25 2007/04/0417:48:442007/04/0417:48:44