Easy control only with VIERA remote control
If you connect this unit to the TV that has “HDAVI Control 2” function with an HDMI cable, you can enjoy using more convenient functions.
You can operate this unit using the following buttons on the TV remote control.
[e, r, w, q], [OK], [RETURN], [EXIT], [OPTION], and the coloured buttons.
Use the remote control for this unit to operate any other buttons (numbered buttons, etc.) that are not listed above.
Using the FUNCTION
MENU window to
operate this unit
VIERA Link
Refer to TV operating instructions for operating the TV.
Display this unit’s “FUNCTION MENU” window using the
TV remote control.
• If this unit is turned off, this unit will be automatically turned on.
Select the item you want to
operate with the TV remote
control then
Using the OPTION
MENU window to
operate this unit
VIERA Link
By using the TV remote control, you can play discs using the “Control Panel” (➔ below) and display the
Top Menu for DVD-Video.
e.g.,
Notes
You cannot use the OPTION menu
while the Top Menu for DVD-Video
is displayed.
Select an item
then
•
Control Panel
“Control Panel” is displayed
(➔ below).
FUNCTION MENU
FUNCTION MENU window is
displayed (➔ above).
Top Menu
DVD-V
Top Menu is displayed (➔ 13).
Menu
DVD-V
Menu is displayed (➔ 13).
Rotate RIGHT
(JPEG)
Rotate still pictures (➔ 31).
Rotate LEFT (JPEG)
Zoom in (JPEG)
Enlarge or shrink the still picture
(➔ 31).
Zoom out (JPEG)
Using the Control Panel
Using the “Control Panel”, you can operate search backward, search forward, stop,
etc. with the TV remote control.
Perform steps
1
and
2
of “Using the OPTION MENU window to operate this
unit”(➔ above).
The Control Panel is displayed (➔ right)
While playing a title or DVD-Video, etc.
[e]: Pause, [r]: Stop, [w]: Search backward, [q]: Search forward,
[OK]: Play, [EXIT]: Exit the screen.
While playing still pictures
[r]:Stop, [w]: View previous picture, [q]: View next picture,
[EXIT]:Exit the screen.
•
–
•
–
Notes
These functions may not work normally depending on the equipment condition.
About “HDAVI Control” function, read the manual of the connected equipment (e.g., TV) too.
When you want to leave the TV on and set only this unit to standby mode
Press [^ DVD] on this unit’s remote control and set to standby mode.
When not using “HDAVI Control”
Set “VIERA Link” in the Setup menu to “Off” (➔ 51).
•
•
FUNCTION MENU window (➔ 33)
To Next Page
Loading...
Need help?
General
