Press [e, r] to select “DVD Management” then
press [OK].
Tips
To return to the previous screen
Press [RETURN].
To exit the screen
Press [EXIT].
Setting Protection
RAM
Use to prevent accidental erasure of disc.
Perform preparation steps 1−3 of “Accessing the
Management Menus” (➔ above).
Press [e, r] to select “Disc Protection” then press
[OK].
Press [w] to select “Yes” then press [OK].
Some options require different operations;
follow the on-screen prompts.
Protection of cartridge disc
RAM
(With a cartridge)
With the write-protect tab in the protect
position, you cannot record to, edit, format
or erase from the disc.
Naming Discs
RAM
-R
-R DL
-RW(V)
+R
+R DL
+RW
You can give a name for the disc.
Perform preparation steps 1−3 of “Accessing the
Management Menus” (➔ above).
Press [e, r] to select “Disc Name” then press [OK].
Entering Text (➔ 36).
–
–
Tips
The disc name is displayed in the DVD Management
window.
With a finalised discs and +RW created Top Menu, the
name is displayed on the Top Menu.
•
•
Deleting All Titles
You can delete all titles on the single-sided DVD-RAM at
once.
Important: Once deleted, contents cannot be recovered.
RAM
Perform preparation steps 1−3 of “Accessing the
Management Menus” (➔ left).
Press [e, r] to select “Delete all titles” then press [OK].
Press [w] to select “Yes” then press [OK].
Press [w] to select “Start” then press [OK].
A message appears when deleting is finished.
Press [OK] to complete.
Notes
Deleting does not work if one or more titles are
protected.
•
Formatting Discs
RAM
-RW(V)
+RW
-RW(VR)
+R
+R DL
(New disc only)
Formatting is the process of making media such as DVD-
RAM recordable on recording equipment.
You can record or edit after formatting the finalised DVD-RW.
Important: Once formatted, contents cannot be recovered.
Perform preparation steps 1−3 of “Accessing the
Management Menus” (➔ left).
Press [e, r] to select “Format Disc” then press [OK].
Press [w] to select “Yes” then press [OK].
Press [w] to select “Start” then press [OK].
Formatting starts (
RAM
may take up
to a maximum of 70 minutes).
A message appears when formatting is finished.
Press [OK] to complete.
Notes
Do not disconnect the AC mains lead while formatting.
This can render the disc unusable.
When a disc has been formatted using this unit, it may
not be possible to use it on any other equipment.
-R
-R DL
Formatting cannot be performed.
-RW(V)
-RW(VR)
You can format only as DVD-Video
format on this unit.
RAM
Pressing [RETURN] during format will cancel the
process. The disc must be reformatted if you do this.
RAM
The disc cannot be formatted if the write-protect
tab (➔ left) is switched to “PROTECT”. Release the
protection to continue.
The message “Unable to format” appears when trying to
format discs the unit cannot use.
•
•
•
•
•
•
•
–
–
–
DVD Management
To Next Page
Loading...
