21
Getting Started
MENU OSD
• SHUTTER (page 41)
When set to ON, still pictures taken in
the PhotoShot mode are recorded with
a visual shutter effect and click sound.
• SELF-REC (page 29)
NORMAL: During self-recording, the
picture on the LCD Monitor
is the same as it will be
recorded.
MIRROR: During self-recording, the
picture on the LCD Monitor
is horizontally reversed.
CAMERA SET-UP
• REMOTE (page 32)ly
VCR1:To receive signals from the
Remote Control set to VCR1.
VCR2:To receive signals from the
Remote Control set to VCR2.
OFF: To prevent reception of signals
from the Remote Control.
• TALLY-LED (page 28)
Tally LED lights during recording when
set to ON.
• BEEP
Set to ON to beep when starting and
stopping camera recording or when
unusual conditions occur. To cancel
the beep, set to OFF.
Palmcorder will beep:
• Once when you start recording
• Twice when you stop recording
• Repeatedly when warning of
unusual conditions (pages 26, 27).
DISPLAY SETTING
• DISPLAY (page 24)
To select the desired type of display
and counter indication displayed on
the LCD Monitor or in the viewfinder.
• C.RESET (page 24)
Setting to ON, resets the counter to
zero.
• DATE/TIME (page 25)
The date and time can be set, and
displayed, on the screen.
• CLOCK-SET (page 17)
When set to ON, the date and time can
be set on the screen.
LCD SETTING
• LCD SETTING (page 29)
Setting to ON displays the menu for
adjusting the LCD brightness and LCD
colour.
100-K.18-23.p65 00/06/14, 11:5421
To Next Page
Loading...
