30
Camera Recording
1 Set POWER to CAMERA.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
CAMERA position.
2 In RECORD/PAUSE mode, hold
down EDIT SEARCH to
perform a forward visual search or
EDIT SEARCH to perform
a reverse visual search. Releasing the
button stops the search.
3 Press RECORD/PAUSE to continue
recording.
EDIT
SEARCH
EDIT
SEARCH
• During Edit Search, the picture will
become mosaic in both
and
search, the sound will be muted in
reverse visual search.
• Make sure the SP/LP tape speed setting
is the same as the recording to eliminate
distortion during edit search.
Press
EDIT SEARCH briefly in the
recording Pause Mode.
The [CHK] indication appears.
After checking, the Movie Camera returns
to the Recording Pause Mode.
• For Recording Check, the Movie Camera
must be in the same mode (SP or LP) as
used for recording, otherwise the
playback picture is distorted.
EDIT
SEARCH
RECORD/PAUSE
Button
POWER Switch
Recording Check
Edit Search
To playback the final few seconds of the
last recorded scene in the Recording
Pause Mode.
You can visually search for scenes in
CAMERA mode to maintain proper
continuity when taping.
Note
100-K.28-33.p65 00/06/14, 11:5530
To Next Page
Loading...
