23
Getting Started
MENU OSD
• REMOTE (page 32)ly
VCR1:To receive signals from the
Remote Control set to VCR1.
VCR2:To receive signals from the
Remote Control set to VCR2.
OFF: To prevent reception of signals
from the Remote Control.
• B.SEARCH (Blank Search) (page 31)ly
Select ON to go directly to a blank
portion of the tape.
DISPLAY SETTING
• DISPLAY (page 24)
To select the desired type of display and
counter indication displayed on the LCD
Monitor or in the viewfinder.
• C.RESET (page 24)
Setting to ON, resets the counter to zero.
• DATE/TIME (page 25)
The date and time can be set, and
displayed, on the screen.
• CLOCK-SET (page 17)
When set to ON, the date and time can
be set on the screen.
LCD SETTING
• LCD SETTING (page 29)
Setting to ON displays the menu for
adjusting the LCD brightness and LCD
colour.
100-K.18-23.p65 00/06/14, 11:5423
To Next Page
Loading...
