37
Basic Operation
Top Scan
If you hold down the
INDEX SEARCH more
than 2 seconds, the Palmcorder will scan
for scenes (or PhotoShots) and playback
the first few seconds of each.
To cancel this function, press
PLAY or
STOP.
Index Forward/Reverse Search
1 Place the Palmcorder in the VCR STOP
mode.
2 Press
INDEX SEARCH fast forward or
rewind the number of recordings
(indexes) forward or back you want to
view. The Palmcorder will advance or
rewind to the desired recording and
automatically PLAY.
• The number of times you pressed the
button is displayed in the EVF and the
LCD monitor if you set INDEX on the VCR
menu to SCENE (page 22).
(Ex., if you press the button three times,
“S3” will appear.)
• If the interval between scenes is less than
1 minute, index search may not operate
properly.
• Response time between pressing the
button and change in the scene number
is quite slow. Do not press the
INDEX
SEARCH rapidly and continuously.
• During Reverse Index Search, playback
will not begin until a tape rewinds all the
way to the beginning.
Optional Remote Control Only (page 57)
Search for a particular scene by using the
electronic index marks placed at the
beginning of each recording.
1Set the POWER to VCR.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
VCR position.
2 Press MENU to display the VCR
mode menu screen.
3 Rotate JOG KEY to select PLAY
MODE , then press JOG KEY to
display the VCR PLAY MODE menu
screen.
4 Rotate JOG KEY to select INDEX ,
and then press JOG KEY to select
PHOTO or SCENE.
Playback Your Recordings
DATE /
TIME
PHOTO
SHOT
REC /
PAU SE
A.DUB
MENU
STOP /
SET
INDEX
SEARCH
SLOW /
F.ADV
PAUSE /
SEL
SLOW /
F.ADV
REW / PLAY
FF /
- SPKR VOL +
T
W
INDEX
SEARCH
REC
CAMCORDER
CAMERA
DISPLAY
ON TV
COUNTER /
TC
RESET
INDEX
SEARCH
(rewind)
Button
INDEX
SEARCH
(fast
forward)
Button
Optional
JOG KEY
MENU
Button
100-K.34-38.p65 00/06/14, 11:5637
To Next Page
Loading...
