Panasonic DMC-FS42 - About the Flash; Settings in AUTO Scene Mode

Basic
- 31 -
About the ash
• When [
q
] is selected, [
w
], [
e
] or [
r
] is set depending on the type of subject
and brightness.
• When [
e
] or [
r
] is set, the ash is activated twice.
Settings in AUTO Scene mode
Only the following functions can be set in this mode.
[REC] menu
– [PICTURE SIZE]

(P70)/[BURST] (P76)/[COLOR MODE]

(P77)

The settings which can be set are different from when other recording modes are used.
[SETUP] menu
– [CLOCK SET]/[WORLD TIME]/[BEEP]/[LANGUAGE]
The settings of the following items are xed.
Item Settings
[POWER SAVE] (P26) [5MIN.]
[AUTO REVIEW] (P26) [2SEC.]
[FLASH] (P44)
q
/
o
[QUALITY] (P71)
h
[SENSITIVITY] (P71) [i.AUTO]
[WHITE BALANCE] (P72) [AWB]
[AF MODE] (P74) [
3
] (Set to [
\
] when a face cannot be
detected)
[AF ASSIST LAMP] (P78) [ON]
Self-timer (P50) [10SEC.]/[OFF]
• The following functions cannot be used.
– Compensating exposure/[DIGITAL ZOOM]
• The other items on the [SETUP] menu can be set in a mode such as the Normal Picture
Mode. What is set will be reected in the Auto Scene Mode.