EasyManua.ls Logo

Panasonic DMC-FX30 - [Food]; [Party]; [Candle Light]; [Baby1];[Baby2]

Panasonic DMC-FX30
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advanced (Recording pictures)
47
VQT1B99
The setting on the AF assist lamp is
disabled.
You cannot set the slow shutter.
The white balance cannot be set.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P44)
This mode allows you to take pictures of food
with a natural hue without being affected by
the ambient light in restaurants etc.
The focus range becomes the same as
macro mode. [5 cm (Wide)/30 cm (Tele) to
]
The white balance cannot be set.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P44)
Select this when you want to take pictures
at a wedding reception, an indoor party etc.
This allows you to take pictures of people
and the background with near real-life
brightness.
Technique for Party mode
Use the flash.
We recommend using a tripod and the
self-timer (P39) for taking pictures.
We recommend rotating the zoom lever to
Wide (1k) and being about 1.5 m from the
subject when taking pictures.
The flash setting can be set to Slow sync./
Red-eye reduction [ ] or Forced ON/
Red-eye reduction [ ].
The white balance cannot be set.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P44)
This mode allows you to take pictures with
a candle-lit atmosphere.
Technique for Candle light mode
If you make the most of the candle light,
you can take successful pictures without
using the flash.
We recommend using a tripod and the
self-timer (P39) for taking pictures.
The focus range becomes the same as
macro mode. [5 cm (Wide)/30 cm (Tele) to
]
The flash setting can be set to Slow sync./
Red-eye reduction [ ] or Forced ON/
Red-eye reduction [ ].
The white balance cannot be set.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P44)
This takes pictures of a baby with a healthy
complexion. When you use the flash, the
light from it is weaker than usual.
You can set two different birthdays by using
[BABY1] and [BABY2]. You can display the
set age when playing back the pictures and
stamp the age on the recorded pictures
with [DATE STAMP] (P77).
The age can also be printed on each
picture by using the software [LUMIX
Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied). (For information
about printing, refer to the separate
operating instructions for PC connection.)
[FOOD]
[PARTY]
/SET
MENU
/SET
MENU
[CANDLE LIGHT]
[BABY1]/
[BABY2]
/SET
MENU
1
2
/SET
MENU

Table of Contents

Related product manuals