H01 Inoperative fan motor Display appears when
inoperative fan motor
is detected after
powered on.
The power is turned
off when detecting.
No display
Displayed is left.
F00 No error information Initial setting for error
code in memory
(Error code
Initialization is
possible with error
code initialization and
main unit
initialization.)
No display
Displayed is left.
F01 Drive hardware error Display appears when
drive unit error is
detected. The event is
saved in memory.
No display
Displayed is left.
F12 Initialization error
when main
microprocessor is
started up for program
recording
Display appears when
initialization error is
detected after starting
up main
microprocessor for
program recording.
The event is saved in
memory.
The power is turned
off when detecting.
No display
Displayed is left.
UNSUPPORT Unsupported disc error *An unsupported
format disc was
played, although the
drive starts normally.
*The data format is
not supported,
although the media
type is supported.
*Exceptionally incase
of the disc is dirty.
“This disc is
incompatible.”
Display for 5 seconds.
NO READ Disc read error *A disc is flawed or
dirty.
*A poor quality failed
to start.
*The track information
could not be read.
“Cannot read. Please
check the disc.”
HARD ERR Drive error The drive detected a
hard error.
“ DVD drive error.” Display for 5 seconds.
To Next Page
Loading...
