Panasonic DMR-EZ28K

22
RQT9046
Selecting Audio Channels to record
Refer to “Recording of multilingual broadcasts” for
detailed information (➔ 20).
When receiving an analog broadcast
-R
-R DL -RW(V) +R +R DL +RW
Select the audio (Main or SAP) in “Multi-channel TV
Sound (Analog)” in the Setup menu (➔ 51).
RAM
to select the audio.
Stereo SAP Mono
Changing during recording changes the recorded
sound.
Stereo:
Main audio (stereo)
If the broadcast is “Mono+SAP”, audio will be
monaural even if you select Stereo mode.
SAP: Secondary audio program (SAP).
When you record SAP, main audio is also recorded. In
such cases, recorded SAP and main audio become
monaural.
Mono: Main audio (monaural).
Select “Mono” if reception is poor during a stereo
broadcast.
e.g., “Stereo” is selected
“((” appears when the unit is receiving
the audio type you selected.
CH 12
Stereo
DVD-RAM
((
Notes
You cannot change the audio type in the following case.
While a disc other than DVD-RAM is inserted when selecting an
analog broadcast
When receiving a digital broadcast
to select the audio.
e.g., “English” is selected
CH 12
English
DVD-RAM
Notes
You cannot change the audio type in the following case.
When there is no choice of languages in a digital broadcast
Before scheduled recording of a digital broadcast with more than
one language channel, set the language in “Multi-channel TV
Sound (Digital)” in the Setup menu (➔ 51).
When broadcast offers no language data, such displays as “Audio
1 of 3” may appear. In such cases, recording may not be possible
in the language selected through the “Multi-channel TV Sound
(Digital)” in the Setup menu (➔ 51).
–
•
–
•
•
Specifying the Recording Time
RAM
-R -R DL -RW(V) +R +R DL +RW
This function allows specifying the length of recording
time up to 4 hours.
During recording
repeatedly until the desired
time is reached.
The recording time and the unit’s display change
as follows:
–
OFF 4:00 OFF 1:30
Counter (Cancel) OFF 0:30 OFF 1:00
OFF 3:00 OFF 2:00
Notes
This function does not work during scheduled recording or Flexible
Recording.
Recording stops and the set time is cleared if you press [
g
STOP].
The unit turns off automatically when the time to stop recording is
reached as long as you do not operate the unit.
Flexible Recording
RAM
-R -R DL -RW(V) +R +R DL +RW
The unit sets the best possible picture quality that fits
the recording within the remaining disc space.
The recording mode becomes FR mode. Refer to “FR
(Flexible Recording)” (➔ 21).
With the unit stopped
Flexible Recording
Record in FR mode.
Max recording time 08 Hour 00 Min.
08 Hour 00 Min.
CancelStart
Set recording time
w
,
q
to select “Hour” and “Min.”
and
e
,
r
to set the recording time.
When you want to start recording
e
,
r
,
w
,
q
to select “Start”, then
Recording starts.–
Tips
To exit the screen
Press [RETURN].
To stop recording partway
Press [
g
STOP].
To show the remaining recording time
Press [STATUS] to show the remaining recording time.
Rec. 0:59
Stereo
DVD-RAM
CH 20
Remaining time
•
•
•
Advanced Recording
DMR-EZ28-PPC(RQT9046-P).indb22DMR-EZ28-PPC(RQT9046-P).indb22 2007/12/0715:25:512007/12/0715:25:51