Panasonic DMR-EZ28K

70
RQT9046
To Reset this Unit
To reset the channel information and the
clock settings
On the main unit
CH
Press and hold both buttons
for about 5 seconds.
To reset the ratings level settings
You can reset both parental rating (➔ 47) and
DVD-Video rating (➔ 49).
With the unit stopped
; OPEN/CLOSE
to open the disc tray.
On the main unit
CH REC
Press and hold
both buttons for
about 5 seconds.
To restore the unit if it freezes
On the main unit
POWER 8
Press and hold for more
than 10 seconds.
The unit is off.–
or
On the main unit
Press and hold for
more than 1 second
with a pointed object.
If the Antenna Connector doesn’t Match
Use one of the following connections to suit the antenna lead to the unit’s RF IN terminal, and the 75 Ω coaxial
cable to the antenna terminals on your TV or other equipment. Refer to the other equipment’s operating instructions
for more information.
Type This unit Other equipment (television etc.)
A twin lead
from the antenna
(Flat) Twin lead
300 Ω cable
300−75 Ω transformer
To this unit’s RF IN
terminal
75−300 Ω transformer
75 Ω coaxial
cable
VHF or UHF
Television
Troubleshooting Guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the
remedies indicated in the chart do not solve the problem, refer to “Customer Services Directory” on page 79 if you
reside in the U.S.A., or refer to “Product information” on page 69 if you reside in Canada.
The following does not indicate a problem with the unit:
Regular disc rotating sound.
Poor reception due to atmospheric conditions.
Image disturbance during search.
Periodic interruptions to the reception due to satellite broadcasting breaks.
Operations not working due to a poor-quality disc. (Try again using a Panasonic disc.)
The unit freezing due to the activation of one of its safety devices (➔ above, To restore the unit if it freezes).
•
•
•
•
•
•
General Issues Power
Page
No power. Insert the AC power supply cord securely into a known active AC outlet. • 8 to 10
The unit switches to standby
mode.
This is a power saving feature. Change “Off Timer” in the Setup menu
to “Off” to always keep the unit on.
• 48
One of the unit’s safety devices is activated. Press [POWER
8
] on
the main unit to turn the unit on.
•
−
The power is turned off
automatically.
If you connected this unit to an “HDAVI Control” compatible TV with an HDMI
cable, this unit will be automatically turned off when the TV is set to off.
• 34
DMR-EZ28-PPC(RQT9046-P).indb70DMR-EZ28-PPC(RQT9046-P).indb70 2007/12/0715:27:212007/12/0715:27:21